Boiled Linseed Oil

Genuine Pine Tar

Genuine Pine Tar is a traditional kilned pine tar and is perfectly suited to modern wooden houses, timber houses, wooden roofs, docks and other outdoor wooden structures. It also has good penetration on non-planed wood. An old formula for wood treatment is one-third each of genuine pine tar, turpentine and boiled or raw linseed oil. More tips and advice for painting with pine tar paint can be found in our painting guide. Click here to get to it!

Hot

Red Pine Tar

This tar paint gives facades the traditional Falun red colour that is so typical of Sweden. It also provides the best protection from weather and wind. Red Tar is perfect for both classic summer cottages with white house corners and wooden houses with modern architecture and colour schemes as well as wooden roofs. You can use Red Tar on untreated wood and on wood that has previously been treated with tar, distemper paint or iron vitriol. If you paint on planed wood, you need to dilute with 10–20% turpentine or denatured alcohol. On non-planed wood, no preparations are needed. Always stir well before painting, since the colour pigment gathers near the bottom during storage. Stir regularly while painting, too. Otherwise the colour pigment will gather at the bottom and you will end up with an uneven colour on your facade. More tips and advice for painting with pine tar paint can be found in our painting guide. Click here to get to it! Top score in Folksam’s paint review Pine tar is a totally natural product that protects your house from mildew and rot fungi, and prevents moisture from penetrating the wood. This led to our Red Pine Tar being one of the outdoor paints that did best in Folksam’s Paint Review.

Hot

Brown Pine Tar

Auson Brown Tar is a classic pine tar. The brown colour has its origins in the national romantic period of the 19th century. Now, more than a hundred years later, brown wood exteriors and roofs have once again become popular. Brown Tar produces a matte brown colour and a beautiful wood surface. And the pine tar naturally provides protection from strong sunlight, moisture and rot. You can use Brown Tar on untreated wood and on wood that has previously been painted with tar, distemper paint or iron vitriol. If you paint on planed wood, you need to dilute with 10–20% turpentine or denatured alcohol. On non-planed wood, no preparations are needed. Always stir well before painting, since the colour pigment gathers near the bottom during storage. Stir regularly while painting, too. Otherwise the colour pigment will gather at the bottom and you will end up with an uneven colour on your facade. More tips and advice for painting with pine tar paint can be found in our painting guide. Click here to get to it!

Pine Tar Oil

Wood is the best and most natural material available. At the same time, it is alive and is affected by everything that happens around it. Weather and wind, acid rain, insects, mould and algae are examples of things that adversely affect the surface of wood. But you can avoid this if you treat your facade, patio, dock or outdoor furniture with pine tar. Auson Pine Tar oil is thin-bodied tar oil which is based on Genuine Pine Tar and the finest Gum Turpentine. Pine Tar is nature´s own wood protection and consists among others various kinds of resins and terpenes. Resins are the tree´s natural way of protecting themselves against micro-organisms and heal injuries. Terpenes are a solvent and it accelerate the drying process. Pine Tar is produced of resin-rich pine trees in furnace. Pine Tar oil penetrates deep into the wood, preventing it from drying out and splitting. The tar protects effectively against water penetration and delays the degradation of the timber. Light Pine Tar oil is dark brown when painting but the colour will eventually fade away as the UV rays break down the tar on the surface. This whole process can take up to a few months before the entire surface has returned to the colour that was before painting. More tips and advice for painting with pine tar oil can be found in our painting guide. Click here to get to it!

Dalbränd Pine Tar

Auson Dalbränd Pine Tar is a fine golden-brown wood tar that takes on a glaze-like quality with time. It is used primarily to meet the high demands placed on treatment of building exteriors, shingled roofs and boats. We recommend diluting the tar with gum turpentine for faster penetration and reduced stickiness. An old formula for wood treatment is equal parts Dalbränd Pine Tar, turpentine and boiled or raw linseed oil. Dalbränd Pine Tar 773, can be used on wood previously treated with pine tar. Coverage: 2–4 m2/litre depending on the surface. More tips and advice for painting with pine tar paint can be found in our painting guide. Click here to get to it!

Sleeper Oil

Sleeper Oil is a decay-inhibiting oil based on Genuine Pine Tar, giving it a characteristic smell that will fade over time. Sleeper Oil effectively provides long-term decay protection for all types of wood, such as sleepers, fences, poles, etc. More tips and advice for painting with pine tar oil can be found in our painting guide.

Raw Linseed Oil

For surface protection of wood, paint manufacturing, and mixing with Genuine Pine Tar.

Gum Turpentine

Genuine gum turpentine is a biodegradable solvent used to dilute pine tar and linseed oil paints. The product also dissolves fat and other contaminants from the surface. Gum Turpentine is a very effective cleaner and disinfectant and is free from water and precipitation. Auson Gum Turpentine contains, just like pine tar, several components which serves the woods need of protection. A traditional recipe for treatment of wood is one third each of gum turpentine, pine tar and linseed oil, raw or boiled. More tips and advice for painting with pine tar paint can be found in our painting guide. Click here to get to it!

Appendices

Item no./Sizes